UV-365HC uVision 365 LED UV-A Blacklight Lamp Kit

AUTHORIZED SERVICE CENTER

UV-365HC uVision 365 Deluxe LED UV-A Lamp Kit

Spectro-UV UV-365HC uVision™ 365 LED UV-A Blacklight Lamp Kit

The Spectro-UV UV-365HC uVision™ 365 Series is a compact, lightweight, handheld 365 nm UV-A inspection lamp kit designed for non-destructive testing (NDT), non-destructive evaluation (NDE), forensic analysis, and security inspection applications.

This fanless lamp features three powerful UV-A LEDs plus an integrated white light LED, delivering a bright, uniform beam with 6,000 µW/cm² UV-A intensity at 15 in / 38 cm and a 7 in / 17.8 cm coverage area. With its state-of-the-art heat sink design, the UV-365HC operates cool and reliably without a fan — reducing dust clogs, repairs, and burn hazards.

The IP65-rated, dust-tight and water-resistant housing stands up to harsh indoor and outdoor inspection environments. Easy-to-operate with a pistol grip and sealed three-way rocker switch (white light / off / UV), the UV-365HC is ASTM E3022 certified and meets EN ISO 3059 specifications with integral UV-A pass filters for low visible light emission and brilliant fluorescent response.

Features

6,000 µW/cm² UV-A intensity at 15 in / 38 cm

Three powerful UV-A (365 nm) LEDs

Integrated white light LED for surface scanning

IP65 rated — dust tight and water resistant

Fanless, cool-running heat sink design

Pistol grip with sealed three-way rocker switch

Long-lasting UV-A pass filters reduce solarization

Extremely low violet hue / visible light emission

Lightweight, rugged, and easy to handle all day

ASTM E3022 certified and meets EN ISO 3059

Benefits

Brilliant fluorescent response for locating hidden indications

Wide, uniform UV-A beam with no hot-spots

Cool to the touch — cuts down on fire and burn hazards

Reliability

No internal fan means fewer repairs and no dust clogs

IP65 sealed construction for harsh environments

Fully serialized Certificates of Conformance and Validation Reports provided

Typical Applications

Fluorescent Magnetic Particle Inspection (FMPI)

Fluorescent Penetrant Inspection (FPI)

Leak detection and HVAC/refrigeration service

Forensic investigation and evidence scanning

Security inspections and counterfeit detection

Key Features

3 UV-A LEDs — for an even wider area of coverage

Long-Lasting UV-A Lenses — reduce the rate of solarization

IP65 Rated — dust tight and protected against jets of water so your lamp is protected in harsh environments

Fanless Design & Cool Running — maintains optimum lamp temperature using state-of-the-art heat sinks. No fan means fewer repairs and no dust clogs, and the lamp stays cool to the touch, cutting down on fire and burn hazards

Pistol Grip — comfortable, balanced control while performing inspections

Sealed Control Switch — pistol-grip mounted three-way rocker switch (white light / off / UV)

Lightweight & Rugged — light enough for all-day use, tough enough for your work environment

White Light LED — allows for scanning surface flaws

Extremely Low Violet Hue / Visible Light Emission — brilliant fluorescent responses

Serialized Certificates of Conformance and Validation Reports Provided

Specifications

Peak UV-A Wavelength	365 nm
Nominal Steady-State UV-A Intensity	6,000 µW/cm² at 15 in / 38 cm
UV-A Coverage Area	7 in / 17.8 cm diameter
Visible Light Emission	< 1 foot-candle (< 11 lux)
LED Configuration	3 UV-A LEDs + 1 white light LED
Power Cord Length	8 ft standard (20 ft optional)
Input Power	100-120 VAC, 50/60 Hz
Ingress Protection	IP65 (dust tight, water resistant)
Cooling	Fanless (heat sink)

Specification Compliance

ASTM E3022

EN ISO 3059

Use Recommendations:

NDT Method: Fluorescent Penetrant Testing and Fluorescent Magnetic Particle Inspection

Recommended Accessories:

UV-A Light Meter

Visible Light Meter

UV-Absorbing Safety Spectacles

Borofloat Filter Protector

Model & Plug Configurations Available:

UV-365HC — USA (Type A/B)

UV-365HC/F — European (Type C/F)

UV-365HC/FA — Australia/China (Type I)

UV-365HC/FB — United Kingdom (Type G)

UV-365HC/FBR — Brazil (Type N)

UV-365HC/20 — 20 ft AC cord (USA)

UV-365HC/20/F — 20 ft AC cord (European Type C/F)

Similar Models:

UV-365MHC — Deluxe series with external battery pack

UV-365HCR — reel kit with 50-foot power cord

What's Included in the UV-365HC Kit

The UV-365HC ships as a complete inspection kit, ready for use:

uVision™ 365 LED 365 nm UV-A Lamp with integrated UV-A pass filter
In-line AC power supply with 8 ft cord
UV-absorbing safety spectacles
Padded protective carrying case
Serialized Certificate of Conformance and Validation Report

For questions about the UV-365HC, accessory options, or to request a quote, please contact Stroud Systems.