Your equipment is only as good as the support you receive after purchase. We stand behind everything we sell or service.
Please see the tables below for our most common Certification, Calibrations and Repair Services.
We also provide calibration services for force gauges, dosimeters, survey meters and radiometers.
Certifications, Calibrations, and Repair Services
Ultrasonic Services Performed at our facility, On Site Services Available.
|
Equipment Style |
Manufacture (s) |
|
| Ultrasonic Thickness Gauges |
GE (Krautkramer), Strestell, Panametrics, Danatronics, Sonatest, NDT Systems, NDT International, Dakota, Newsonic |
Please send Most common used transducer and charger associated with these units so that we can verify there operation at the time of required servicing |
| A-Scan Thickness Gauges |
GE (Krautkramer), Strestell, Panametrics, Danatronics, Sonatest, NDT Systems, NDT International, Dakota, Newsonic |
Please send Most common used transducer and charger associated with these units so that we can verify there operation at the time of required servicing |
| Ultrasonic Flaw Detectors (Analog and Digital Models) |
GE (Krautkramer), Strestell, Panametrics, Sonatest, NDT Systems, NDT International, Dakota, Newsonic |
Please send charger and power adapters associated with these units so that we can verify there operation at the time of required servicing |
| Ultrasonic Systems | GE (Krautkramer) | USPC 2100's, USIP 20's, KSE's |
Our Technicians are Factory trained on GE (Krautkramer, Strestell) and Panametrics Equipment. Currently being trained on the Danatronics and Newsonic Equipment. Through are vast knowledge of how Ultrasonic Equipment is designed and functions we have the capabilities of diagnosing and repairing other Manufactures equipment for problems such as defective keypads, faulty power supplies, and of course defective transducers. Because of the Electronics that are currently being built in to all types of Electronic Equipment including computers and the wide use of Ball socket surface mounted components at the board level there is a chance that any piece of equipment will have to be returned to the Manufacture for Repairs and or for the Eprom to be Reprogrammed. We work closely with all of the above Manufactures, and if this type of repair is needed for your Instrument. With your approval we will take care of dealing with the factory on repairs or any other factory recommendations for your Instrument. As always it is our standard policy to supply you with a Quotation for Repairs other than Standard Calibration, Certification Services.
Magnetic Particle Services Performed at our facility, On Site Services Available.
Magnetic Particle Services
|
Equipment |
Manufacture |
Type of Service Available |
Our Facility or On Site |
| Hand Held Yokes | Parker Research, Mangaflux, ESC | Replace Cords, Switches, Legs, Test Operation, Lift Test Certifications | Our Facility |
| Magnetometers | RB Annis, Parker, Mangaflux, Gould Bass | Certifications | Our Facility and On Site with other services |
|
Magnetic Particle Bench and Portable Units |
Magnaflux, Gould Bass, TSI, Magwerks, Granier and other Manufactures |
Diagnoses, Repairs, Calibration and Certifications |
On Site |
Radiograph Equipment Services Performed On Site
Emergency Diagnostic Services, Repairs and Maintenance
Annual and Quarterly Preventive Maintenance and Services
Emergency Repairs and Maintenance
Hardness Testers
| Manufacture | Tester Style | Type of Service Available |
|
GE (Krautkramer), Strestell |
UCI Method (Microdur's) MIC-2, MIC-10, MIC-20 Rebound Testers Dynamic, Dynapocket, Hardchecker, MIC-20 |
Broken Pin Removal on Microdurs, Diagnostics and Replacement of Failed Components. |
|
Equotip |
Rebound Method |
Diagnostics and Replacement of Failed Components. |
|
Time Trade |
Rebound Method |
Diagnostics and Replacement of Failed Components. |
|
Newage |
Pin Testers |
Diagnostics and Replacement of Failed Components. |
|
Newage |
Bench Testers BOSS and CAMS Systems |
Diagnostics and Replacement of Failed Components. |
|
All Other Bench Testers |
Diagnostics and Replacement of Failed Components. |
Hardness Tester Certifications, Calibrations can be supplied using an outside Calibration Source. One is Local to the Houston Area, The other would be the Appropriate Factory. The most common Certificated Calibration Standards are kept in stock, Special Certified Calibration Standards Available upon request.
RENTALS
We carry a large supply of Ultrasonic Rental Equipment for the NDT inspector.
-
Thickness Gauges come standard with one probe, Please Specify your application. (Plate or Tubular goods)
-
Flaw Detectors Come with Batteries (Rechargeable), Chargers, Operating Manuals upon Request. (Via E-Mail if needed)
-
Transducers and Transducer Kits are available, Very Application oriented.
-
Other Rental items available for those emergency situations: Black light, Mag Particle Yoke.
We rent by the day, week or month.
- Other NDT Inspection Rental Equipment is available through our wide range of suppliers.
We can also arrange attractive leasing rates for those who want to buy new equipment but don’t have the up-front capital to purchase on net 30 terms. Call or email us for more information regarding renting or leasing equipment.
If you don’t see what you need, please give us a call at 713-861-3270 or email us at customerservice@stroudsystems.com and we’ll be glad to answer any questions you may have. Thanks for visiting with us!
