Parker Research Magnetic Inspection Equipment, Cables, Inspection Tools and and Accessory Items

Parker Research Yokes & Inspection Units

DA 200 AC / DC Parker Research Yoke
Click to Enlarge
DA-200 Contour Probe

The DA-200 Contour Probe is a portable, self-contained instrument designed to produce a magnetic field on or within ferro-magnetic materials.

The selective AC and pulsed DC functions are built into a single reliable instrument. The AC mode produces an intense AC field for detection of surface defects and demagnetizing after inspection. The DC mode produces an intense pulsed DC field for detection of some subsurface defects.

A 210 AC Superlift Parker Research Yoke
Click to Enlarge
A-210 Heavy Duty Superlift

The AC mode produces an intense A.C. field for detection of surface defects and demagnetizing after inspection. Combined with the flexibility of articulating legs and a rugged molded housing, the Contour Probe can be used on nearly any part or surface contour... in the lab, factory, or field site.

DA 400 AC DC Parker Research Contour Probe
Click to Enlarge
DA400 - Contour Probe

The DA-400 Contour Probe is a portable, self-contained instrument designed to produce a magnetic field on or within ferro-magnetic materials.

The selective AC and pulsed DC functions are built into a single reliable instrument. The AC mode produces an intense AC field for detection of surface defects and demagnetizing after inspection. The DC mode produces an intense pulsed DC field for detection of some subsurface defects.

B 100 AC Econmical Parker Research Yoke
Click to Enlarge
B-100 Contour Probe

The instrument that does so much, so well. If you do any work with ferrous metals…shipyard…aerospace…steel mill…foundry…weldment or vehicle overhaul, you need the performance advantage of the B-100 Contour Probe.

Wide Versatility, Mechanically, the B-100 Probe will conform to practically any surface configuration. Strong, constant AC fields or high intensity pulsed DC fields, using the DC-300 power supply.

B 300 AC Sealed Parker Research Yoke id=
Click to enlarge
B-300 Contour Probe

The B-300 Contour Probe is a lightweight (7 1/2 pounds), Magnetic Inspection Yoke designed to perform Magnetic Particle inspections quickly and reliably.

As with the other popular Parker Probes the B-300 has fully adjustable legs which allow the strong AC field to be applied directly to the precise area to be inspected, regardless of part size or mass.

B 310 AC Sealed Parker Research
Click to enlarge
B 310 Contour Probes

The B-310 Contour Probe is a lightweight (6 lbs.) Magnetic Inspection Yoke designed to perform magnetic particle inspections quickly and reliably, and with greater versatility. The overall length of the unit is only 7.25".

The B-310 Mini Contour Probe provides great flexibility and reduced size.

Parker Research P2 AC Yoke
Click to enlarge
P-2 Series Contour Probes

The Instrument that does so much, so well If you do any work with ferrous metals.... in the shipyard, aerospace, steel mill, foundry, weldment or vehicle overhaul... you need the performance advantage of the P-2 Contour Probe.

The ergonomic, light-weight design is extremely comfortable and reduces stress on the operator. This new style allows for an excellent grip in a variety of testing conditions.

BAC 310
Click to enlarge
BAC-310 Battery/Inverter

The BAC-310 operates independently from any outside power source. Power is derived from the internal 12 VDC battery, which is inverted to 110 VAC output through the inverter circuitry. A separate battery charger is provided for overnight charging of the battery. The entire unit is contained within a heavy-duty steel case with dimensions 11 ½" H × 7 ½"W × 5 ½" D and weighs only 28 pounds.

Plug any of the Parker A.C. series Contour Probes (Yokes) into the A.C. outlet. Follow operating instructions for the individual Probe for correct and normal A.C. Yoke inspection techniques and requirements.

Parker Research Coils

PL 10 and PL 8 A.C. Magnetizing Coils

Click to Enlarge

Parker’s portable magnetizing coils are designed for magnetic particle inspection of ferrous metal parts. The new coils allow for the use of either dry powder or wet fluorescent inspection media and may be used for demagnetizing as well.

The coils are designed for a 50% duty cycle, and are equipped with thermal overload protection. Both the PL-10 and the PL-8 operate from a standard 115 VAC, 60 Hz power source. The PL10S and PL8S operate from a 230VAC, 50-60 Hz power source

Parker Research Portable Inspection Units

DA 750 Heavy Duty High Amp Portable Magnetic Inspection Unit
Click to enlarge
DA 750 Portable Magnetic Inspection Unit

The Parker Research DA-750 heavy duty portable magnetic inspection unit provides high output AC or HWDC fields for magnetic particle inspection. Field selection is determined by using the appropriate field cable connector.

Current output is infinitely variable from zero to maximum by use of the current control located on the front panel, and is indicated by the panel meter. Actual current output is determined by cable size and length. AC magnetic fields offer the best sensitivity for detection of surface defect indications.

DA 1500 Heavy Duty High Amp Portable Magnetic Inspection Unit
Click to Enlarge
DA 1500 Portable Magnetic Inspection Unit

The Parker Research DA-1500 portable heavy duty magnetic inspection unit provides high output AC or HWDC fields for magnetic particle inspection. Field selection is determined by using the appropriate field cable connector.

Current output is infinitely variable from zero to maximum by use of the current control located on the front panel, and is indicated by the panel meter. Actual current output is determined by cable size and length.

TR 700 Transport Truck, Parker Research
Click to Enlarge
TR 700 Transport Truck

TR 700 Transport Truck for Heavy Duty Portable Magnetic Inspection Units for use with the DA 750 or DA 1500 Portable Magnetic Inspection Units

Portable Magnetic Inspection Units Cables and Accessory Items
Portable Magnetic Inspection Units Cables and Accessory Items

Portable Magnetic Inspection Units Cables and Accessory Items

Individual Prods
MA-7000
Individual Prods
Dual Horizontal Prod Assembly
MA-7001
Dual Horizontal Prod Assembly
(adjustable tips)
Replacement Prod Tips
MA-7ST
Replacement Prod Tips
(aluminum and copper)
Braided Contact Clamp
MA-7003
Braided Contact Clamp
4/0 Either End Connector
MA-7EC
4/0 Either End Connector
4/0 Either End/Lug Adapter
MA-7EL
4/0 Either End/Lug Adapter
Remote Switch Assembly
MA-7RC
Remote Switch Assembly (20')
Remote Foot Switch Cable
MA-7FC
Remote Foot Switch Cable (20')
15' 4/0 Cable with lug/either end
MC-1540
15' 4/0 Cable Set (2) with lug/either end
4/0 Cable Set with either ends
MC-1541
15' 4/0 Cable Set (2) with either ends
Transport Truck by Parker Research
TR-700
Transport Truck

Magnetic Inspection Accessories

xzc
PM 50 Permanent Magnetic Yoke Set

For magnetic particle inspection applications (where applicable) per specifications ASTM E 709, ASTM E 1444, ASME Section V Article 7 and MIL-STD-1949.

PM 50A Permanent Magnetic Yoke Kit
PM 50 Permanent Magnetic Yoke Set with Kit "A" Items
  • PM-50 Permanent Magnetic Yoke Set
  • Plastic carrying case
  • PB-1 Powder Applicator
  • 1 lb each of red and gray dry inspection powder
TB-10 Magnetic 10lb Weight Lift Test Bar
Magnetic Weight Lift Test Bars

Provides for the calibration and certification of Magnetic Particle Inspection Yokes. Bar weight is stamped on each bar and is traceable to NIST.

Available in 10 LB, 40 LB, or 50 LB sets

TB 10SP Special Magnetic Weight Lift Test Bar
 with Artificial Defects
TB 10SP Special Magnetic Weight Lift Test Bar with Artificial Defects

Magnetic Weight Lift / Defect Test Bar provides for the 10 lb AC weight lift calibration of Magnetic Particle Inspection Yokes. In addition the reverse side of the TB 10SP bar contains artificial defects as indicated above. Demonstration of actual defect indications is very useful for visual and operational performance purposes.

NA 16 Notch Defect Test Bar
NA 16 Notch Defect Test Bar

Notch Test Bar complies with the requirements of MIL-STD-271E and F (Ships), paragraph 4.3.1.2, and NAVSEA-TB-T9074-AS-GIB-010/271.

The procedure specifies an inspection with the ability to detect the smallest rejectable surface defects, artificial or natural, in a test specimen.

Y 300, Y 400 Molded Induction Yoke Lights
Y 300, Y 400 Molded Induction Yoke Lights

The Parker Y-300 and Y-400 Probe Lights are molded inspection lights designed to fit the B-300 series and the DA-400 and B-100 Contour Probes respectively. The lights produce substantial close-in illumination for magnetic testing

MG 25 Magnetic Field Indicator
MG 25 Magnetic Field Indicator
Available in 10-0-10, 20-0-20 and other ranges
safdasdf
MG 50 Pie Gauge
Field Flux Strip (Burma Castrol)
Field Flux Strip (Burma Castrol)

Sold per Strip, but Packaged 5 strips to a package

G - General Purpose and A - Aircraft versions available
PB 1 Controlled Magnetic Powder Blower
PB 1 Controlled Magnetic Powder Blower

Magnetic Powder Blower provides reliable and controlled application of Magnetic Inspection Powder to areas previously inaccessible; horizontal, vertical and overhead.

RB 4 Rubber Powder Applicator
RB 4 Rubber Powder Applicator

Salt and Pepper Shaker Top

RB 4 Rubber Powder Applicator
RB 1 Excess Poweder Blower / Remover

If you don’t see what you need, please give us a call at 713-861-3270 or email us at cs@stroudsystems.com and we will be glad to answer any questions you may have.

Thanks for visiting with us!

Contact Information:

Phone:

(713) 861-3270

Fax:

(713) 861-4784

Address:

600 N. Shepherd Dr. Suite 115

Houston Texas, 77007-1323

Directions:
Click Here
E-Mail US:
Contact us
We accept
credit cards